Technical data - RD 7 DPLM 12/3 
Working widths
1 956 mm = 77 inches
Gauge
E 22
Bars/Knitting elements
2 single-needle bars with latch needles,
2 knock-over comb bars, 2 centrally swivelling stitch comb bars, 7 ground bars, GB3 until GB5 stitch-forming on both needle bars
Knock-over comb bar distance
2 - 12 mm, stepplessly adjustable, central regulation of the distance height, patented central guide-bar reset and patented knock-over reset
Warp beam support
7 warp beam positions, free-standing for sectional beams with a flange diameter of
1 016 mm (40 inches)
KAMCOS®
Motion Control / Multi Speed for the control of the basic functions
Printer interface / 3 ½" floppy disc drive for reading and writing
Operator Interface / 12,1" Color Touchscreen for production data acquisition,
network interface (Ethernet) for linkage and connection for the relevant data acquisition, patterning systems and Teleservice
Optionally: yarn inspection Laserstop
Yarn let-off device
For each warp beam position 1 electronically controlled yarn let-off drive, driven by geared motor, controlled via Motion Control
Fabric take-up
Electronically controlled, 4-roller system, driven by geared motor, controlled via Motion Control
Batching device
No. 14 F
separately standing, with friction drive
max. batch diameter of 1270 mm (50 inches)
Pattern drive
N-drive with 7 pattern discs
integrated Tempi change gear drive
Electrical equipment
Speed-regulated main drive, power-failure safe, with separated fine-positioning function, total connected load 34 kVA (with 77 inches) or 38 kVA (with 138 inches)
Rights for technical modifications reserved!
We are always at your disposal!
Your contact person:
Mr. Oliver Mathews
Guidance and Sales
Phone.: +49 (0)6104 402-553
contact
or your regional KARL MAYER agency
Information on the machine
RD 6 DPLM / RD 7 DPLM
