Technical Data - MULTIAXIAL 
Working widths
max. 1575 mm = 62" min. 1025 mm (40")
max. 2600 mm = 102" min. 2000 mm (79")
max. 3350 mm = 132" min. 2600 mm (102")
selectable to define in steps of 25
Machine gauge
max. 14 F (needles per 25 mm)
Bars / Knitting elements
Compound needle bar, closing wire bar
1 or 2 ground guide bar(s),
knockover sinker bar, supporting bar
retaining sinker bar, filler thread bar
Pattern drive
N-drive with pattern disks, integrated tempi change gear drive
Weft insertion system
Weft insertion principle
draw-off from creel more
Warp beam support
1 and/or 2 warp beam positions,
one electronically controlled yarn let-off drive for each warp beam position
and/or warp beam brake with infinitely variable delivery rolls
Fabric take-up
Electronically controlled two-roller system
(Multiaxial - 2/3 roller system)
Batching device
Standalone with friction drive,
directly depending on textile-technological requirements
Oil supply
Heating and cooling by circulating-air heat exchanger, circulation by electropump, spray-immersion lubrication
Electrical equipment
Speed-controlled main drive, power-failure safe including inching motion function, total load connected 45 kVA
(+ 5 kW for optional glass chopper)
KAMCOS®
Motion Control / Single Speed to control basic functions, Pattern Control to control the ground guide bars, 12.1" color touchscreen for production control, Ethernet interface for networking and interconnecting to associated data acquisition, patterning systems and Teleservice feature.
more
Rights for technical modifications reserved!
We are always at your disposal.
Your contact person:
Mr. Axel Wintermeyer
Consulting and Sales
Phone: +49 (0)371 8143-231
contact
or your regional KARL MAYER agency
Information about the machine
MULTIAXIAL
Dimensional Layout - MULTIAXIAL
