Technical data - RSE 5 (EL) 
Working widths
3302 mm = 130 inches
4318 mm = 170 inches
Gauges
E24, E28 and E32
further gauges on request
Bars/knitting elements
Single-needle bar and tongue bar, stitch comb bar, knock-over comb bar, 5 ground guide bars
Warp beam support
5 warp beam positions, free-standing, for sectional beams with a flange diameter of 533 mm (21 inches)
Suitable for working from 2 warp beam positions, free-standing, for sectional beams with a flange diameter of 812 mm (32 inches) and 2 warp beam positions, free-standing, for sectional beams with a flange diameter of 533 mm (21 inches)
KAMCOS®
RSE 5 – Motion Control / Single Speed for the control of the basic functions
RSE 5 EL – Motion Control / Multi Speed for the control of the basic functions
Pattern Control for the control of the ground guide bars
Operator Interface / 12,1" Color Touchscreen for production display, network interface (Ethernet) for networking and connection for the corresponding data acquisition, patterning systems and Teleservice
Optionally: integrated yarn inspection Laserstop
more...
Yarn let-off device
For each completely mounted warp beam position 1 electronically controlled yarn let-off drive, driven by geared motor, controlled via Motion Control
Fabric take-up
Elecronically controlled, continuous up to 170 inches, 4-roller system driven by geared motor, controlled via Motion Control
Batching device
No. 18E (Optionally: No. 34A*, 34B*)
*controlled via Motion Control
Pattern drive
Drive N with 5 pattern discs
integrated tempi change gear drive
Optionally: electronical guide bar drive (EL)
Electrical equipment
Speed-regulated main drive, power-failure safe, incl. inching motion function, total connected load 25 kVA or 47 kVA (EL)
Oil supply
Heating, cooling by means of recirculating air heat exchanger, circulation by electric pump, filter with dirt-monitoring system
Optionally: heat exchanger for water conditioning systems instead of recirculating air exchanger
Rights for technical modifications reserved!
We are always at your disposal!
Your contact person:
Mr. Oliver Mathews
Guidance and Sales
Phone.: +49 (0)6104 402-553
contact
or your regional KARL MAYER agency
Information about the machine
RSE 5 (EL)
Dimension and warp beam support
Batching device
